Encore EN-1000 LTE CAT 1 Cellular Router
Zoom image

Encore EN-1000 LTE CAT 1 Cellular Router

Versions for T-Mobile and Sprint available too.
  • dbv0
Add a different product to compare
  • RFWEL DevID
    EN-1000-LTE-VZW
  • Manuf P/N
    EN-1000


Signal Improvement Solutions (Cellular)
Encore EN-1000 LTE CAT 1 Cellular Router includes 2 antenna ports to attach external cellular antennas. See below for different options for high gain and high performance indoor and outdoor antennas to improve the signal strength and indoor coverage. Additionally, see below for RF bidirectional amplifiers/ distributed antenna systems/ repeaters/ small cells to further improve indoor coverage without directly attaching pigtail/ cable the device.
Pigtail for External Cellular Antenna

Search Cable Adapters

Pigtails for other devices

Cellular Repeaters/ Bi-Directional Amplifiers

Because the Encore EN-1000 LTE CAT 1 Cellular Router device has an external antenna port you could use the high gain external antenna kits above to boost your signal. However, if your outdoor signal is very weak, or you require a very long cable run to get from the outdoor antenna to the device (long runs lead to large signal loss) consider using an RF bidirectional amplifier/ repeater suitable for the supported bands and cellular operator to boost your indoor coverage:

LTE Antenna Boosters/ RF Bidirectional Amplifiers/ Repeaters/ Relays

Customize your solution

STEP 1: Your Encore EN-1000 LTE CAT 1 Cellular Router operates on these frequency bands: LTE B4 (1700 MHz) LTE B13 (700 MHz). Determine what frequency bands your operator uses here. Then determine compatible antennas based on what your device supports and what your operator supports here.

 

STEP 2: Determine the cable length you need from the outdoor antenna to the Encore EN-1000 LTE CAT 1 Cellular Router and configure your length here (select N-Male on both ends)

 

STEP 3: Determine if you need a lightning protection device. If you do, you will need a jumper cable.

 

STEP 4: Order the pigtail for your modem below:

 

STEP 5: If the pigtail's Connector 2 is FME-F you will need an N-Female/FME-F adapter to mate to the N-Male cable in step 2. Alternatively, select an N-Male/FME-M cable in step 2 above (more expensive and less re-usable) to avoid requiring this adapter.

 

Contact us if unsure about any of the steps above or for help configuring your coverage/speed improvement solution or visit our support website to learn more.

See below for other LTE antennas or contact us if you cannot find what you are looking for

Other LTE Antennas

Wireless Site & Infrastructure Solutions

See below for wireless site components to integrate Encore EN-1000 LTE CAT 1 Cellular Router to your wireless infrastructure

Outdoor Radio Enclosure

Low loss RF Cables

Other Wireless Site Accessories

Power Solutions

See below for remote and backup power solutions for Encore EN-1000 LTE CAT 1 Cellular Router

Off-Grid Solar Solutions

Remote Power Solutions

Additional Device Support

Discuss in the Forums (user community input)

Learn More about LTE Signal Improvement Solutions

View Device in Manufacturer's Website

Broadband Wireless Resources

Reference Engineering Drawings (RFWEL Engr)

Contact us

Device questions

No questions yet. Be the first to ask a question!
  • Brand/ Manufacturer
    Encore Networks
  • Cellular Operator
    Verizon
  • Device Type
    Wireless Gateway/ Modem
  • Cellular Radio Specifications
    • Cellular Standard
      4G-LTE
    • Cellular Band
      LTE B4 (1700 MHz), LTE B13 (700 MHz)
    • LTE Category
      Category 4
    • Cellular Radio Includes External Antenna Port?
      Yes
    • Number of Cellular Antenna Ports
      2
    • Cellular Antenna Port Type
      SMA-Female