Previous image
ZTE MF910 MF910V 4G LTE Mobile Hotspot
Next image
Zoom image

ZTE MF910 MF910V 4G LTE Mobile Hotspot

--
  • dbv0
Add a different product to compare
  • Weight
    0.2315 lbs
  • RFWEL DevID
    MF910
  • Manuf P/N
    MF910


Signal Improvement Solutions (Cellular)
ZTE MF910 MF910V 4G LTE Mobile Hotspot includes 2 antenna ports to attach external cellular antennas. See below for different options for high gain and high performance indoor and outdoor antennas to improve the signal strength and indoor coverage. Additionally, see below for RF bidirectional amplifiers/ distributed antenna systems/ repeaters/ small cells to further improve indoor coverage without directly attaching pigtail/ cable the device.
Pigtail for External Cellular Antenna

PIGMF910 (NOTE: Need this pigtail to connect this device to antenna cable. It is included in preconfigured kits.)

Search Cable Adapters

Pigtails for other devices

Pre-Configured Outdoor Cellular Antenna Kits

See below for the most popular LTE antenna kits to boost the signal of your ZTE MF910 MF910V 4G LTE Mobile Hotspot. These kits include cables, lightning protection, and all required pigtails/ adapters. If none of these pre-configured kits works for you, see below for customized solutions.

Pre-Configured Antenna Kits
Outdoor Direction Yagi Antenna Kits (RECOMMENDED) with 20 ft Cable with 50 ft Cable

12 dBi Directional Yagi Antenna kit for 698-2700 MHz operation. Slightly larger than Panel (dimensions: 35" x 9" x 2") but higher gain.

Also available with 100 ft cable RFWY12-MF910-100 or see below for custom configuration.

Outdoor Directional Panel Antennas Kits with 20 ft Cable with 50 ft Cable

10 dBi Directional Panel Antenna kit for 698-2700 MHz operation. More compact than Yagi (dimensions: 26" x 13" x 5") but lower gain.

Also available with 100 ft cable RFWP10-MF910-100 or see below for custom configuration.

Outdoor Omnidirection Antenna Kits with 20 ft Cable with 50 ft Cable

9 dBi Omni-directional Antenna kit for 698-2700 MHz operation. ONLY recommended if have no dominant signal from specific direction.

Also available with 100 ft cable RFW0M9-MF910-100 or see below for custom configuration.

Cellular Repeaters/ Bi-Directional Amplifiers

Because the ZTE MF910 MF910V 4G LTE Mobile Hotspot device has an external antenna port you could use the high gain external antenna kits above to boost your signal. However, if your outdoor signal is very weak, or you require a very long cable run to get from the outdoor antenna to the device (long runs lead to large signal loss) consider using an RF bidirectional amplifier/ repeater suitable for the supported bands and cellular operator to boost your indoor coverage:

LTE Antenna Boosters/ RF Bidirectional Amplifiers/ Repeaters/ Relays

Customize your solution

STEP 1: Your ZTE MF910 MF910V 4G LTE Mobile Hotspot operates on these frequency bands: LTE Band 028, LTE Band 020, LTE Band 008, LTE Band 003, LTE Band 001, LTE Band 007. Determine what frequency bands your operator uses here. Then determine compatible antennas based on what your device supports and what your operator supports here.

 

STEP 2: Determine the cable length you need from the outdoor antenna to the ZTE MF910 MF910V 4G LTE Mobile Hotspot and configure your length here (select N-Male on both ends)

 

STEP 3: Determine if you need a lightning protection device. If you do, you will need a jumper cable.

 

STEP 4: Order the pigtail for your modem below:

PIGMF910 (NOTE: Need this pigtail to connect this device to antenna cable. It is included in preconfigured kits.)

 

STEP 5: If the pigtail's Connector 2 is FME-F you will need an N-Female/FME-F adapter to mate to the N-Male cable in step 2. Alternatively, select an N-Male/FME-M cable in step 2 above (more expensive and less re-usable) to avoid requiring this adapter.

 

Contact us if unsure about any of the steps above or for help configuring your coverage/speed improvement solution or visit our support website to learn more.

To use your ZTE MF910 MF910V 4G LTE Mobile Hotspot in a vehicle, consider the LTE antennas below.

Vehicle LTE Antennas

See below for other LTE antennas or contact us if you cannot find what you are looking for

Other LTE Antennas

Signal Improvement Solutions (WiFi)
ZTE MF910 MF910V 4G LTE Mobile Hotspot is not listed as having an external WLAN antenna port in the RFWEL Wireless Device Information Database. This may be either because the device really does not have an external antenna port or RFWEL Wireless Device Specialists have not confirmed the existence and utility of such ports. Please contact us for the latest updates or if you believe this device contains external antenna ports and you would like to learn more about compatible signal improvement solutions.
WiFi Repeaters/ Extenders/ Amplifiers

Because the ZTE MF910 MF910V 4G LTE Mobile Hotspot is not listed as having an external antenna port, you would need to use a wireless network extender or repeater to increase the WiFi signal coverage

WiFi Antenna Boosters

Wireless Site & Infrastructure Solutions

See below for wireless site components to integrate ZTE MF910 MF910V 4G LTE Mobile Hotspot to your wireless infrastructure

Outdoor Radio Enclosure

Low loss RF Cables

Other Wireless Site Accessories

Power Solutions

See below for alternate and portable power solutions for ZTE MF910 MF910V 4G LTE Mobile Hotspot

Portable Power Solutions

Additional Device Support

Discuss in the Forums (user community input)

Learn More about LTE Signal Improvement Solutions

Learn More about Wi-Fi Signal Improvement Solutions

Broadband Wireless Resources

Reference Engineering Drawings (RFWEL Engr)

Contact us

  • Cellular Operators
    Verizon
  • Brand/ Manufacturer
    ZTE
  • Device Type
    Mobile Hotspots
  • Cellular Radio Specifications
    • Cellular Standards
      LTE
    • Cellular Bands
      LTE Band 028, LTE Band 020, LTE Band 008, LTE Band 003, LTE Band 001, LTE Band 007
    • LTE Category
      Category 4
    • Cellular Radio Includes External Antenna Port?
      Yes
    • Number of Cellular Antenna Ports
      2
    • Cellular Antenna Port Type
      TS9
    • Cellular Main Radio Chipset Vendor
      Qualcomm
    • Cellular Main Radio Chipset
      MDM9225
  • WLAN Radio Specifications
    • WLAN Standard
      802.11a (Wi-Fi 2), 802.11ac (Wi-Fi 5), 802.11b (Wi-Fi 1), 802.11g (Wi-Fi 3), 802.11n (Wi-Fi 4)
    • WLAN Frequency Band
      2.4 GHz, 5 GHz
    • Type of WLAN Antenna(s)
      Internal
    • WLAN Radio Includes External Antenna Port?
      No
  • Mechanical
    • Weight (lbs)
      0.2315
    • Dimensions (inch)
      4.0945 x 2.5394 x 0.5531

Device questions

No questions yet. Be the first to ask a question!