CradlePoint AER3100LPE-SP AER3100 w/ LTE/HSPA+/EVDO Sprint & WiFi
Zoom image

CradlePoint AER3100LPE-SP AER3100 w/ LTE/HSPA+/EVDO Sprint & WiFi

  • dbv0
Add a different product to compare
  • Weight
    6.0000 lbs
  • RFWEL DevID
    AER3100LPE-SP
  • Manuf P/N
    AER3100LPE-SP


Signal Improvement Solutions (Cellular)
CradlePoint AER3100LPE-SP AER3100 w/ LTE/HSPA+/EVDO Sprint & WiFi includes an antenna port to attach external cellular antennas. See below for different options for high gain and high performance indoor and outdoor antennas to improve the signal strength and indoor coverage. Additionally, see below for RF bidirectional amplifiers/ distributed antenna systems/ repeaters/ small cells to further improve indoor coverage without directly attaching pigtail/ cable the device.
Pigtail for External Cellular Antenna

Search Cable Adapters

Pigtails for other devices

Cellular Repeaters/ Bi-Directional Amplifiers

Because the CradlePoint AER3100LPE-SP AER3100 w/ LTE/HSPA+/EVDO Sprint & WiFi device has an external antenna port you could use the high gain external antenna kits above to boost your signal. However, if your outdoor signal is very weak, or you require a very long cable run to get from the outdoor antenna to the device (long runs lead to large signal loss) consider using an RF bidirectional amplifier/ repeater suitable for the supported bands and cellular operator to boost your indoor coverage:

LTE Antenna Boosters/ RF Bidirectional Amplifiers/ Repeaters/ Relays

Customize your solution

STEP 1: Your CradlePoint AER3100LPE-SP AER3100 w/ LTE/HSPA+/EVDO Sprint & WiFi operates on these frequency bands: LTE B2 (1900 MHz) LTE B4 (1700 MHz) LTE B5 (850 MHz) LTE B13 (700 MHz) LTE B17 (700 MHz) LTE B25 (1900 MHz). Determine what frequency bands your operator uses here. Then determine compatible antennas based on what your device supports and what your operator supports here.

 

STEP 2: Determine the cable length you need from the outdoor antenna to the CradlePoint AER3100LPE-SP AER3100 w/ LTE/HSPA+/EVDO Sprint & WiFi and configure your length here (select N-Male on both ends)

 

STEP 3: Determine if you need a lightning protection device. If you do, you will need a jumper cable.

 

STEP 4: Order the pigtail for your modem below:

 

STEP 5: If the pigtail's Connector 2 is FME-F you will need an N-Female/FME-F adapter to mate to the N-Male cable in step 2. Alternatively, select an N-Male/FME-M cable in step 2 above (more expensive and less re-usable) to avoid requiring this adapter.

 

Contact us if unsure about any of the steps above or for help configuring your coverage/speed improvement solution or visit our support website to learn more.

See below for other LTE antennas or contact us if you cannot find what you are looking for

Other LTE Antennas

Wireless Site & Infrastructure Solutions

See below for wireless site components to integrate CradlePoint AER3100LPE-SP AER3100 w/ LTE/HSPA+/EVDO Sprint & WiFi to your wireless infrastructure

Outdoor Radio Enclosure

Low loss RF Cables

Other Wireless Site Accessories

Power Solutions

See below for remote and backup power solutions for CradlePoint AER3100LPE-SP AER3100 w/ LTE/HSPA+/EVDO Sprint & WiFi

Off-Grid Solar Solutions

Remote Power Solutions

Additional Device Support

Discuss in the Forums (user community input)

Learn More about LTE Signal Improvement Solutions

Broadband Wireless Resources

Reference Engineering Drawings (RFWEL Engr)

Contact us

Device questions

No questions yet. Be the first to ask a question!
  • Brand/ Manufacturer
    Cradlepoint
  • Cellular Operator
    Sprint
  • Device Type
    Wireless Router
  • Manufacturer
    Cradlepoint
  • Cellular Radio Specifications
    • Cellular Standard
      4G-LTE
    • Cellular Band
      LTE B2 (1900 MHz), LTE B4 (1700 MHz), LTE B5 (850 MHz), LTE B13 (700 MHz), LTE B17 (700 MHz), LTE B25 (1900 MHz)
    • Cellular Radio Includes External Antenna Port?
      Yes
    • Cellular Antenna Port Type
      SMA-Female
  • GNSS Radio Specifications
    • GNSS Type
      GPS
    • GNSS (GPS) External Antenna Port Type
      SMA-Female
  • Mechanical
    • Weight (lbs)
      6
    • Dimensions (inch)
      12.2 x 10.6 x 1.8